• Superior strength and visibility
  • For heavy-duty chores
  • Parking stands are integrated on the loader
Features
Specifications
Details

Features

  • Lift Height: 181-188 in. (4.602-4.764 m)
  • Lift Capacity: 5,269-5,489 pounds (2395-2495 kg)

Specifications

Key Specs

Boom breakout force Measured at pivot (Y)
4793 kgf
10567 lbf
Bucket rollback force capacity At ground-level line (ZZ)
4640 kgf
10229 lbf
Clearance at full height - bucket dumped (C) 3820 mm
150.4 in.
Dump angle, degrees (E) -58.9 degree (angle)
Lift capacity at full height Measured at pivot (U)
2065 kg
4553 lb
Maximum lift height (A) 4650 mm
183.1 in.
Rollback angle, degrees (G) 42 degree (angle)
  • Boom lockout for easy service
  • Loader removal (parking) made easy
  • Concealed oil lines improve appearance and reduce damage
  • False rod bucket cylinders improve productivity
Features

Features

  • Lift Height: 181-188 in. (4.602-4.764 m)
  • Lift Capacity: 5,269-5,489 pounds (2395-2495 kg)
Specifications

Specifications

Key Specs - Boom breakout force:
Measured at pivot (Y)<br/>4793 kgf<br/>10567 lbf<br/>
Key Specs - Bucket rollback force capacity:
At ground-level line (ZZ)<br/>4640 kgf<br/>10229 lbf<br/>
Key Specs - Clearance at full height - bucket dumped (C):
3820 mm<br/>150.4 in.
Key Specs - Dump angle, degrees (E):
-58.9 degree (angle)
Key Specs - Lift capacity at full height:
Measured at pivot (U)<br/>2065 kg<br/>4553 lb<br/>
Key Specs - Maximum lift height (A):
4650 mm<br/>183.1 in.
Key Specs - Rollback angle, degrees (G):
42 degree (angle)
Loader - Boom breakout force:
Measured at pivot (Y)<br/>4793 kgf<br/>10567 lbf<br/>Measured at 800 mm ahead of pivot (Z)<br/>4395 kgf<br/>9689 lbf<br/>
Loader - Bucket angle:
Dump angle, degrees (E)<br/>-58.9 degree (angle)<br/>Rollback angle, degrees (G)<br/>42 degree (angle)<br/>
Loader - Bucket rollback force capacity:
At maximum height (VV)<br/>3641 kgf<br/>8027 lbf<br/>At 59-in. (1500-mm) lift height (XX)<br/>4599 kgf<br/>10139 lbf<br/>At ground-level line (ZZ)<br/>4640 kgf<br/>10229 lbf<br/>
Loader - Bucket used:
Materials 2450 mm<br/>Materials - 85 in.
Loader - Bucket weight:
352 kg<br/>776 lb
Loader - Cycle times:
Loader raise, seconds<br/>5 seconds<br/>Loader lower, seconds<br/>5.5 seconds<br/>Bucket dump, seconds<br/>3.5 seconds<br/>Bucket rollback, seconds<br/>4 seconds<br/>
Loader - Digging depth (H):
150 mm<br/>5.9 in.
Loader - Dimensions:
Maximum lift height (A)<br/>4650 mm<br/>183.1 in.<br/>At full height - bucket level(B)<br/>4465 mm<br/>175.8 in.<br/>At full height - bucket dumped (C)<br/>3820 mm<br/>150.4 in.<br/>
Loader - Leveling configuration:
Mechanical Self Leveling (MSL)
Loader - Lift capacity at 59 in. (1500 mm):
Measured at pivot (W)<br/>3420 kg<br/>7540 lb<br/>Measured at 800 mm ahead of pivot (X)<br/>3280 kg<br/>7231 lb<br/>
Loader - Lift capacity at full height:
Measured at pivot (U)<br/>2065 kg<br/>4553 lb<br/>Measured at 800 mm ahead of pivot (V)<br/>2240 kg<br/>4938 lb<br/>
Loader - Overall height in carry position (J):
2.4 m<br/>7.8 ft
Loader - Overall length (I+F), ft (m):
5.6 m<br/>18.7 ft
Loader - Reach:
At maximum height (D)<br/>820 mm<br/>32.3 in.<br/>At ground level - bucket level (F)<br/>2790 mm<br/>109.8 in.<br/>
Tractor - Front tire:
380/85R34
Tractor - Model:
7820/7830
Tractor - Pump capacity:
96.1 L/min<br/>25.4 gpm
Tractor - Rated pressure:
195 bar<br/>2828 psi
Tractor - Rear tire:
480/80R46
Tractor - Wheelbase:
2860 mm<br/>112.6 in.

Key Specs

Boom breakout force Measured at pivot (Y)
4793 kgf
10567 lbf
Bucket rollback force capacity At ground-level line (ZZ)
4640 kgf
10229 lbf
Clearance at full height - bucket dumped (C) 3820 mm
150.4 in.
Dump angle, degrees (E) -58.9 degree (angle)
Lift capacity at full height Measured at pivot (U)
2065 kg
4553 lb
Maximum lift height (A) 4650 mm
183.1 in.
Rollback angle, degrees (G) 42 degree (angle)
Details

Boom lockout for easy service

Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

A hydraulic shut-off valve is included with the H-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

Loader removal (parking) made easy

Parking standsParking stands
#

John Deere loaders are easily removed and reinstalled on tractors without tools. The parking system allows removing or attaching the loader to the tractor in minutes without the need for tools.

 

In order to remove or park the loader, apply slight down pressure to the loader boom with the bucket dumped at approximately a 30-degree angle. With the tractor in park, install the parking stands and place the mast pins in the open position.

 

To watch a video of parking and attaching an H-Series loader click here.

Removing or parking the loader
Bucket slightly dumped and down pressureBucket slightly dumped and down pressure
#
Parking stand in stored positionParking stand in stored position
Removing parking standRemoving parking stand
Bucket slightly dumped - Parking stands installedBucket slightly dumped - Parking stands installed
Mast pin in the closed positionMast pin in the closed position
Mast pin in the open positionMast pin in the open position

Utilizing the boom circuit with the tractor in neutral, rotate the mast forward until the mast has rotated past the pin location on the mounting frame by extending the lift cylinder. Now using the bucket circuit, rollback the bucket until the mast is removed from the pocket and will clear the tires.

Masts rotated forward, then bucket rolled backMasts rotated forward, then bucket rolled back
#

With the tractor in park, shut the engine off and relieve the hydraulic pressure as indicated for the tractor. Relieve pressure on the single-point hydraulic connection, then disconnect or open the single-point hydraulic connector.

Parked loaderParked loader
Relieving the hydraulic pressureRelieving the hydraulic pressure
Disconnect/open single point hydraulic connectionDisconnect/open single point hydraulic connection

Store the loader half of the single-point connector. The tractor is now ready to back away from the loader.

Storing the hydraulic hosesStoring the hydraulic hoses
#
Tractor ready to be backed away from loaderTractor ready to be backed away from loader
Backing away from loaderBacking away from loader

Concealed oil lines improve appearance and reduce damage

Concealed oil lines through boom armConcealed oil lines through boom arm
#
Oil lines routed through the boom armOil lines routed through the boom arm
Oil lines routed through the torque tubeOil lines routed through the torque tube

Over time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.

 

To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.

False rod bucket cylinders improve productivity

False rod cylinderFalse rod cylinder
#

Fast bucket cycle times are important to dump the load from the bucket as quickly as possible, (quite often) in order to be as productive as possible, while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the mechanical self-leveling loaders.

 

Therefore, all MSL H-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

  • Boom lockout for easy service
  • Loader removal (parking) made easy
  • Concealed oil lines improve appearance and reduce damage
  • False rod bucket cylinders improve productivity
×