• Offset wheels for smooth, level raking
  • Hydraulic aftermarket kits
  • Easy windrow width adjustment
  • Optional center kicker wheel
Features
Details

Features

  • Windrow Width: 38 - 58 in. (96.5 - 147.3 cm) 
  • Raking Width: 24 ft. (7.3 m) maximum
  • # of Wheels: 12 Wheels
  • Rake beam support wheel kit for WR1214 and WR1216 Wheel Rakes
  • Easy windrow width adjustment
  • Hydraulic aftermarket kits for wheel rakes
  • Wind panel conversion kits for WR11, WR12, WR33, and WR34 Wheel Rakes
  • Narrow transport width
  • Offset wheels for smooth, level raking
  • Wheel conversion kits for WR12, WR23, WR23, and WR33 Wheel Rakes
  • Center kicker wheel conversion kit for WR12 Wheel Rakes
Features

Features

  • Windrow Width: 38 - 58 in. (96.5 - 147.3 cm) 
  • Raking Width: 24 ft. (7.3 m) maximum
  • # of Wheels: 12 Wheels
Details

Rake beam support wheel kit for WR1214 and WR1216 Wheel Rakes

Rake beam support wheelRake beam support wheel
#

Rake beam support wheels provide added support to the front corner of each beam of the wheel rake. They improve float over irrigation tracks, as well as in rough ground conditions.

 

NOTE: When ordering a quantity of one, two wheels are shipped, one for each side of the beam.

Easy windrow width adjustment

A crank aids the windrow width adjustmentA crank aids the windrow width adjustment

A crank located at the rear of the Frontier™ WR12 Series High-Capacity Wheel Rake makes it easy to adjust the windrow width.

Hydraulic aftermarket kits for wheel rakes

The first conversion kit listed consists of hydraulic couplers that are not standard equipment on WR1212, WR1214, WR1216, and WR1218 Wheel Rakes.

 

The second and third conversion kits allow the operator to hydraulically open and close raking arms on the featured wheel rakes instead of having to manually adjust them. 

Wind panel conversion kits for WR11, WR12, WR33, and WR34 Wheel Rakes

This conversion kit includes one wind panel with hardware. It is used on wheel rakes for applications involving short or dry crops that can blow through a standard rake wheel.

Narrow transport width

Creates easy transport for narrow roadsCreates easy transport for narrow roads
#

Frontier™ WR12 Series High-Capacity Wheel Rakes open and close hydraulically. Transport widths are 2.6 m (8.5 ft) or less, making it easy to negotiate narrow roads and gates.

Offset wheels for smooth, level raking

Offset wheels are perfect for uneven terrainOffset wheels are perfect for uneven terrain
#

The limited oscillating, offset tandem wheels on the Frontier™ WR12 Series High-Capacity Wheel Rake ensure a smooth ride, even over irrigation tracks.

Wheel conversion kits for WR12, WR23, WR23, and WR33 Wheel Rakes

The tandem wheel conversion kits for the WR12, WR22, WR23, and WR33 Series Wheel Rakes improve the ride over rough fields and terrain.

 

The two-wheel add-on kit converts the WR1214 to a WR1216 to increase raking width.

 

The extra wheels conversion kits add fifth and sixth wheels to the WR2212 and WR2316. The extra wheels support the ends of each wing to reduce raking wheels from over-engaging the ground on rough or rolling terrain.

Center kicker wheel conversion kit for WR12 Wheel Rakes

The center kicker wheel conversion kits have either two or three center kicker wheels that rake the hay in the center of the WR12 Series High-Capacity Wheel Rakes. These center kicker wheels improve drying time and windrow pickup for the baler by raking the hay that is not turned by the rake wheels.

  • Rake beam support wheel kit for WR1214 and WR1216 Wheel Rakes
  • Easy windrow width adjustment
  • Hydraulic aftermarket kits for wheel rakes
  • Wind panel conversion kits for WR11, WR12, WR33, and WR34 Wheel Rakes
  • Narrow transport width
  • Offset wheels for smooth, level raking
  • Wheel conversion kits for WR12, WR23, WR23, and WR33 Wheel Rakes
  • Center kicker wheel conversion kit for WR12 Wheel Rakes

Other Hay Equipment Models

×