• 410 engine hp
  • John Deere PowerTech™ 9.0L engine
  • e23™ PowerShift Transmission
  • AirCushion™ Suspension System
  • Our most spacious, comfortable cab
Features
Specifications
Details

Features

  • Hydraulics: Closed-center, pressure and flow compensated with 4 standard SCV (5 and 6 available); hydraulic flow up to 85gpm (321L)
  • Wheel/Track: 2-Track
  • Engine HP: 410
  • Suspension: AirCushion™ Suspension and a 4-Post cab suspension
  • Transmission Choices: e23™ 23F/11R Powershift Transmission with Efficiency Manager

Specifications

Capacities

Cooling system

40.3 L
10.6 U.S. gal.
Crankcase oil volume 25 L
6.8 U.S. gal.
Diesel exhaust fluid (DEF) tank 31.3 L
8.3 U.S. gal.
Fuel tank 764 L
202 U.S. gal.
Transmission-hydraulic system 180 L
47.5 U.S. gal.
  • Gain the advantages of a JDLink™ connected machine
  • Experience the ultimate in comfort with the Ultimate Comfort and Convenience package
  • Get 360 degrees of coverage for maximum productivity with visibility packages
  • Simple turnkey experience with the StarFire™ 6000 Integrated Receiver
  • John Deere Connected Support™ transforms the industry
  • Take advantage of the Generation 4 CommandCenter™ display, designed for efficiency
  • Hydraulic pump options to meet varying flow requirements
Features

Features

  • Hydraulics: Closed-center, pressure and flow compensated with 4 standard SCV (5 and 6 available); hydraulic flow up to 85gpm (321L)
  • Wheel/Track: 2-Track
  • Engine HP: 410
  • Suspension: AirCushion™ Suspension and a 4-Post cab suspension
  • Transmission Choices: e23™ 23F/11R Powershift Transmission with Efficiency Manager
Specifications

Specifications

Additional information - Date collected:
11-Oct-19
Capacities - Cooling system:
<br/><br/>40.3 L<br/>10.6 U.S. gal.
Capacities - Crankcase oil volume:
25 L<br/>6.8 U.S. gal.
Capacities - Diesel exhaust fluid (DEF) tank:
31.3 L<br/>8.3 U.S. gal.
Capacities - Fuel tank:
764 L<br/>202 U.S. gal.
Capacities - Transmission-hydraulic system:
180 L<br/>47.5 U.S. gal.
Drawbar - Drawbar category:
Standard: Category 4<br/>Optional: Category 4 with heavy-duty support
Drawbar - Maximum vertical load:
Standard: 2245 kg<br/>4950 lb<br/>Optional (dependent on drawbar position): 4990 kg<br/>11,000 lb
Electrical system - Alternator size:
Standard: 200 amp<br/>Optional: 330 amp
Electrical system - Battery options:
12 V
Electrical system - Total cold cranking amps:
1,850 CCA
Electrical system - Type of bulb in beacon (Halogen, Zenon, LED):
<br/>
Electrical system - Type of bulb in headlight (Halogen, Zenon, LED):
<br/>Standard: halogen, 65 W<br/>Available: LED
Electrical system - Working lights:
Standard: 18 halogen<br/>Available: 18 LED<br/>22 LED
Engine performance - Engine peak torque:
At 1600 rpm: 1851 Nm<br/>1365 lb-ft
Engine performance - Maximum engine power:
ECE-R120: 326 kW<br/>443 hp
Engine performance - Power boost:
8 percent
Engine performance - PTO torque rise:
40 percent
Engine performance - Rated power:
ECE-R120: 302 kW<br/>410 hp
Engine performance - Rated PTO power (hp SAE):
231 kW<br/>310 hp
Engine specifications - After treatment type:
Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Engine specifications - Aspiration:
Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation
Engine specifications - Cylinders liners:
Wet-sleeve
Engine specifications - Description:
John Deere PowerTech&trade; PSS 9.0 L (B20 diesel compatible)
Engine specifications - Displacement:
9 L<br/>549 cu in.
Engine specifications - Emission level:
Final Tier 4
Engine specifications - Engine family:
JJDXL09.0308
Engine specifications - Engine type:
Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Engine specifications - Rated speed:
2100 rpm
Hydraulic system - Available flow at a single rear SCV:
1.3-cm (1/2-in.) couplers: 132 L/min<br/>35 gpm<br/>1.9-cm (3/4-in.) coupler: 159 L/min<br/>42 gpm
Hydraulic system - Number of rear selective control valves (SCVs):
Standard: 1.3-cm (1/2-in.) ISO couplers: 10<br/>Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available<br/>1.9-cm (3/4-in.) ISO coupler: 7
Hydraulic system - Pump rated output:
Standard: 85-cc pump: 227.1 L/min<br/>60 gpm<br/>Optional: 85-cc plus 35-cc dual pump: 321 L/min<br/>85 gpm
Hydraulic system - SCV control:
Electronic
Hydraulic system - Type:
Closed-center, pressure/flow compensated system with load sensing
Key Specs - Base machine weight:
e23, 63.5-cm (25-in.) tracks: 15,600 kg<br/>34,400 lb
Key Specs - Engine description:
John Deere PowerTech&trade; PSS 9.0 L (B20 diesel compatible)
Key Specs - Engine displacement:
9 L<br/>549 cu in.
Key Specs - Hydraulic pump rated output:
Standard: 85-cc pump: 227.1 L/min<br/>60 gpm<br/>Optional: 85-cc plus 35-cc dual pump: 321 L/min<br/>85 gpm
Key Specs - Maximum engine power:
ECE-R120: 326 kW<br/>443 hp
Key Specs - Rated engine power:
ECE-R120: 302 kW<br/>410 hp
Key Specs - Rated PTO power (hp SAE):
231 kW<br/>310 hp
Key Specs - Rear hitch category (SAE designation):
Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg<br/>20,000 lb<br/>Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg<br/>15,000 lb
Key Specs - Transmission type:
Standard: e23&trade; PowerShift&trade; with Efficiency Manager&trade; 40K, 40 km/h (24.9 mph)
Miscellaneous - Country of manufacture:
USA
Operator station - Cab glass area:
6.52 m<sup>2</sup><br/>70.18 sq ft
Operator station - Cab suspension:
Standard: four-post cab suspension
Operator station - Display:
Standard: Generation 4 4100 CommandCenter&trade; with 17.8-cm (7-in.) display&lt;br/&gt;Optional: Generation 4 4600 CommandCenter with 25.4-cm (10-in.) display
Operator station - Inner cab volume:
3.24 m<sup>3</sup><br/>114 cu ft
Operator station - Instructional seat:
Standard
Operator station - Radio:
Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Operator station - Rollover protective structure, OOS:
<br/><br/>
Operator station - Seat:
Degree of seat swivel, left hand<br/>25 degree (angle)<br/>Degree of seat swivel, right hand<br/>40 degree (angle)<br/>Standard: air suspension
Precision AG - Guidance:
Integrated AutoTrac&trade;
Precision AG - Remote diagnostics:
Available with activated JDLink hardware and activations
Precision AG - Telematic:
Available with JDLink&trade; hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Rear axle - Final drive type:
Inboard planetary three pinion
Rear hitch - Hitch category (SAE designation):
Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg<br/>20,000 lb<br/>Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg<br/>15,000 lb
Rear hitch - Maximum lift capacity behind lift points:
Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg<br/>26,729 lb
Rear hitch - Sensing type:
Electrohydraulic
Rear power take-off (PTO) - Engine rpm (at rated PTO speeds):
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Rear power take-off (PTO) - Multispeed PTO option availability:
Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
Rear power take-off (PTO) - PTO actuation:
Electrohydraulic with adjustable modulation
Rear power take-off (PTO) - Type:
Independent<br/>Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm<br/>Optional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
Serviceability - Interval for engine coolant change:
6,000 hours
Serviceability - Interval for engine oil change:
500 hours
Serviceability - Interval for hydraulic/transmission oil change:
1,500 hours
Steering - Type:
Standard: Speed-sensitive, hydrostatic, differential: 406-mm (16-in.) diameter steering wheel - 1.8 turns lock-to-lock
Tracks - Drive type:
Camso® 4500 and 6500 General Ag Series - friction drive track belts
Tracks - Midrollers:
Three
Tracks - Track width:
Standard: 635 mm<br/>25 in.<br/>Available: 406 mm<br/>16 in.<br/>457 mm<br/>18 in.<br/>609 mm<br/>24 in.<br/>762 mm<br/>60 in.
Tracks - Tread spacing:
Standard: 1,828.8 to 3,048 mm<br/>72 - 120 in.
Transmission - Type:
Standard: e23&trade; PowerShift&trade; with Efficiency Manager&trade; 40K, 40 km/h&lt;br/&gt;24.9 mph
Weight - Base machine weight:
<br/><br/>e23, 63.5-cm (25-in.) tracks: 15,600 kg<br/>34,400 lb
Weight - Maximum ballast level:
17,690 kg<br/>39,000 lb
Weight - Maximum permissible weight:
19,958 kg<br/>44,000 lb

Capacities

Cooling system

40.3 L
10.6 U.S. gal.
Crankcase oil volume 25 L
6.8 U.S. gal.
Diesel exhaust fluid (DEF) tank 31.3 L
8.3 U.S. gal.
Fuel tank 764 L
202 U.S. gal.
Transmission-hydraulic system 180 L
47.5 U.S. gal.
Details

Gain the advantages of a JDLink&trade; connected machine

Monitor machines on the go Monitor machines on the go
Connectivity provides data that drives better decisions Connectivity provides data that drives better decisions

Producer needs and their success is John Deere’s focus. As functionality becomes more accepted and even expected, that functionality moves from being optional to being included with the machine. In model year 2019, AutoTrac™ guidance and documentation was included on machines equipped with a 4600 CommandCenter™ Display. Five years of JDLink is also included with the purchase of all model year 2020 and newer machines equipped with a 4G LTE Modular Telematics Gateway (MTG). The functionality of JDLink on these machines includes everything that was previously included with JDLink Access + Remote Display Access (RDA) and JDLink Connect subscriptions. This added connectivity enables customers to more easily realize the value of a connected machine.

  • Easily transfer data and collaborate with trusted advisors to plan your field work quickly. You or your employees can spend more time in the field working rather than sitting on a headland setting up the technology. With a connection between John Deere Operations Center and your machines, changes to field plans occur as needed. Those changes may include changes in varieties, application rates, or machines.
  • Better enable data-driven decisions. By using the insights gathered from machines along with the tools in Operations Center (e.g., Field Analyzer, Field Analyzer Beta, and Machine Analyzer) you can understand how your fields are performing and what field plans had an impact. John Deere Operations Center gives you access to more than 100 connected software tools, so you have the ultimate choice of popular industry tools. And, if you don't want to analyze the data yourself, you can share the data with those that help you make decisions to provide the insights you need.
  • Report work completed accurately and timely for compliance and billing purposes.
  • Increase machine uptime with Connected Support. Your local John Deere dealer can provide remote monitoring services and diagnostics to help keep your machines up and running, reduce your maintenance expenses through early detection of problems, and provide over-the-air software updates for displays, receivers, and controllers.
  • Get quick in-field support with RDA. You can monitor your machines from your office computer or a mobile device on the go.
  • Remotely manage machines and employees to give you insights into how they are performing. If machines are being underutilized or field operations are not being properly conducted, you can put plans in place to improve productivity.
  • Quickly make changes to improve your harvesting operations by remotely viewing and adjusting combine settings.

To use JDLink, the following is required:

  • MTG
  • An active JDLink subscription
  • A John Deere Operations Center account to access machine and agronomic data

Experience the ultimate in comfort with the Ultimate Comfort and Convenience package

Ultimate Comfort and Convenience package Ultimate Comfort and Convenience package

The Ultimate Comfort and Convenience package offers unsurpassed visibility, operator comfort, control placement, and ride and sound quality. Features in this package include:

 

Controls

  • CommandARM™ console with hitch and hydraulic integrated controls
  • Air conditioner and heater with automatic temperature controls
  • Radio and volume controls
  • Hitch control lever lock and selective control lever lock
  • Tilt/telescoping steering wheel with position memory
  • Auto trac resume button
  • iTEC™ engagement buttons

 

Displays

  • 21.3-cm (8.4-in.) 4200 or 26.4-cm (10.4-in.) 4600 Generation 4 CommandCenter™ Display
  • Digital cornerpost display with:
    • Fuel level gauge, including low fuel warning
    • Temperature gauge
    • Diesel exhaust fluid (DEF) gauge, including low DEF warning
    • Engine rpm
    • Transmission commanded gear or wheel speed
    • Vehicle system functions, such as iTEC system, that are operating
  • Monitor mounts on right-hand front post and rear cab post

 

Storage

  • Storage compartment underneath the instructor seat
  • Left-hand ceiling storage compartment
  • Refrigerator located on the left side behind the instructor seat
  • Beverage holders sized to accommodate various containers

 

Sound

  • Passive noise reduction system
  • Premium sound system, including touchscreen radio, smartphone interface, AM/FM/WX, aux and Bluetooth® with voice control, inputs, XM® ready, six speakers with one subwoofer, and business band ready

 

Outlets

  • Three 12-V convenience outlets (cigarette lighter style)
  • Six 12-V three-pin outlets with adapter (provides switched and unswitched power)
  • Four charging USB ports
  • 120-V AC power outlet
  • One International Organization for Standardization (ISO) nine-pin connector
  • Service ADVISOR™ data port

 

Windows

  • Swing-out rear window that opens 30 degrees
  • Laminated glass
  • Two-speed and intermittent front, rear, and right-hand side wiper with washer
  • Front, left and right-hand side, and rear pull-down sunshade

 

Lights

  • Interior dome light in the ceiling
  • Map lights

 

For additional attachments and mounting solutions, see Cab convenience or Cab mounting solutions.

Seat
Leather seat Leather seat

The seat improves ride quality and helps to reduce operator fatigue.

 

Features include:

  • Leather
  • Heat and ventilation to keep the operator at a comfortable temperature
  • Adjustable bolsters
  • Massage functionality
  • Electronic controls to adjust to operator preference
  • Pneumatic lumbar adjustment
  • Seat height adjustments conveniently located below the left armrest
  • Fore-aft adjustment is easy to reach, located below the left armrest
  • Cushion length adjustment to get the perfect fit
  • Swivel adjustment, located on the front of the seat, allows the seat to be swiveled 40 degrees to the right or 25 degrees to the left of the center position with a pivoting CommandARM console
  • Seat can be configured with air seat suspension, ActiveSeat™ II suspension or air seat plus cab suspension
  • Operator presence switch warns if the operator is out of the seat while operating key functions
  • Seat belt retractor
  • Centered cab seat provides excellent over-shoulder visibility
  • Adjustable shock absorber permits ride adjustment from soft to firm to match the operator's desired comfort level
  • Removable cushions allow for easy cleaning
  • Folding instructional seat

 

Bluetooth is a trademark of Bluetooth SIG, Inc. XM is a trademark of Sirius XM Radio, Inc.

Get 360 degrees of coverage for maximum productivity with visibility packages

Ultimate Visibility package Ultimate Visibility package

Visibility is one of the most important attributes of the cab. While lighting is a large portion of that, features like windshield wipers, mirrors, sunshades, and cameras are also important to overall visibility. For this reason, John Deere offers three visibility packages on 7 and 8 Family Tractors:

  • Select 
  • Premium
  • Ultimate
Lighting

The lighting configurations are available to match various applications and ensure maximum around-the-clock productivity.

 

Light housings are large, allowing for optimum total lumens and available light. The Select Visibility package uses 65-W halogen bulbs, whereas the Premium and Ultimate Visibility packages use light-emitting diode (LED) lights. The Premium and Ultimate Visibility packages replace Select Visibility package’s halogen lights with LED lights. The only lights that are not LED are the low-beam driving lights; they remain halogen. This allows each LED light to work at a lower temperature and no one light works harder than any other. The uniformity in LED coverage allows only one type of light output surrounding the tractor.

 

The lighting pattern in the Ultimate Visibility package provides industry-leading performance in nighttime visibility. LED lights provide maximum brightness and a true color output for excellent field definition that is easy on the operator's eyes.

 

The LED lights provide 40 percent greater coverage width and 10 percent more light coverage in the rear. LED lighting packages use 45 percent less amps than standard halogen lights and have an increased life expectancy over HID lights which leads to lower costs of ownership over the life of the tractor.

 

The low- and high-beam driving/work lights are adjustable. Please refer to the electrical section in the Operator’s Manual for complete details on adjusting lights.

 

NOTE: Lighting packages may vary depending on region.

Simple turnkey experience with the StarFire™ 6000 Integrated Receiver

StarFire 6000 Integrated Receiver on 8R Tractor StarFire 6000 Integrated Receiver on 8R Tractor
StarFire 6000 Integrated Receiver on X9 Combine StarFire 6000 Integrated Receiver on X9 Combine

The John Deere StarFire™ 6000 Integrated Receiver is the new standard in John Deere Precision Ag technology. The integrated design further enhances the value that you have come to expect from StarFire products.

The StarFire 6000 Integrated Receiver eliminates all setup, installation, and calibrations. There is no need to verify machine and receiver measurements, as this has been done precisely for you at the factory. You will spend 60 minutes less per receiver move each season, which gives you more time to focus on other parts of your operation.

With updated Ethernet connectivity, software updates are easier and faster. StarFire 6000 Integrated Receiver maintains the speed to update software in under 4 minutes while remaining in the cab. Over-the-air updates are 85 percent faster with the StarFire 6000 Integrated Receiver because of Ethernet connectivity.

John Deere Connected Support&trade; transforms the industry

Maximizing uptime for John Deere customers through the use of connectivity and technology Maximizing uptime for John Deere customers through the use of connectivity and technology

John Deere Connected Support is a proactive service approach that utilizes the telematics machine connection to leverage a suite of remote support tools available to improve service efficiency and reduce machine downtime on all 7, 8, and 9 Family Tractors.

  • Proactive services that drive more uptime
  • In-the-moment services to ensure quality job performance
  • Leveraging technology to be more effective and efficient

 

You know that when you’re in the field the unexpected can happen. When it does, you need a quick resolution. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you promptly—in the cab or anywhere you are. Better yet, your dealer can receive alerts and connect to your equipment. You know your dealer is always ready to keep you farming – and farming better. Starting with model year 2020, your John Deere tractors will come with a 5-year JDLink™ subscription from the factory that makes this connection possible.

John Deere Connected Support tools John Deere Connected Support tools

Stop fearing the unexpected and start planning for it with the following John Deere Connected Support tools.

 

Take advantage of the Generation 4 CommandCenter&trade; display, designed for efficiency

The Generation 4 CommandCenter was designed to provide a consistent user experience by providing full-screen viewing of more run page modules, shortcut keys, and precision agriculture capabilities.

Expect easier set-up, along with increased operator confidence, thanks to a simple, customizable interface. The improved design of the Generation 4 CommandCenter also aids in an optimal operating experience and maximizes uptime.

In order to increase your efficiency, take advantage of the following features offered by the Generation 4 CommandCenter:

Layout manager
Layout Manager selection page Layout Manager selection page
Layout Manager application Layout Manager application
  • Easily create page views that meet user needs and that are also equipped with default run pages.
Language and units
Switch between active and alternate language on the display Switch between active and alternate language on the display

Easily switch between languages with the option to set the active and alternate language. Configure the shortcut bar to include the language toggle allows different individuals to easily switch the display between languages.

Users and access

Users and access allow the owner or manager to lock out certain functions to prevent operators from accessing or changing settings. Lock-out functions are managed with a defined pin for the administrator.

The Gen 4 Universal Display can be set to one of two profiles, administrator or operator. The administrator profile is always set to the full access group. This group allows unlimited access to all of the features and has the ability to lock and unlock features in the operator profile.

Machine monitor
Machine monitor page Machine monitor page
  • The Machine Monitor application provides you instantaneous readings about the status or condition of your machine.
    • This application shows parameters such as engine speed, coolant temperature, and ground speed.
Work monitor
Work monitor page Work monitor page
  • The Work Monitor application displays performance information about the task being performed by the machine.
    • You are shown averages, totals, and productivity of the machine, such as area worked, average working speed, and fuel usage.
    • Work setup places the settings needed to properly setup features such as AutoTrac, Documentation, and Section Control in a single location. Settings include:
      • Client, farm, and field
      • Crop type
      • Machine and implement dimensions
      • Variety/hybrid and planting/seeding rates
      • Variable rate prescriptions
      • Product and application rates
      • Application rates through the implement screens
Video capability

The video application on 4600 CommandCenter™ and 4640 Universal Display has been redesigned to improve user interface and prepare for future enhancements. Features include the ability to name and configure cameras for viewing and scanning.

  • Machines equipped with a 4200 CommandCenter are equipped with one video input, and the 4600 CommandCenter has four video inputs.
    • You can set a variety of triggers. With each trigger, the image will then appear on the display.
Flags
View of run page with flag options View of run page with flag options
  • Mark areas in the field that need special attention such as rocks, tile lines, or weed pressure.
    • Flags previously recorded on the Gen 4 or GreenStar™ 3 2630 Display can be transferred between monitors.
Field boundaries
Boundary creation from coverage Boundary creation from coverage
Headland creation Headland creation
  • Manually drive field boundaries with the Generation 4 CommandCenter or import existing boundary information from the GreenStar 3 2630 Display or John Deere Operations Center. Gen 4 documentation data can be used to create boundaries from coverage within the John Deere Operations Center.
Automatic base station switching
Setup base stations in Fields and Boundaries applications Setup base stations in Fields and Boundaries applications
  • Customers using John Deere RTK Radio 450 or 900 can link a base station to a desired client,/ farm,/ or field. This allows automatic switching to the associated base station when changing fields. The ability to import base station assignments into Operations Center and send back to machines will be available at a later date.
Dual-display mode
Dual display Dual display
  • Generation 4 CommandCenter may be configured to run with the following John Deere displays connected at the cornerpost of a John Deere tractor:
    • GreenStar 2 1800 Display
    • GreenStar 2 2600 Display
    • GreenStar 3 2630 Display
    • 4640 Universal Display
    • 4240 Universal Display

NOTE: Vehicle applications will always be located on the Gen 4 CommandCenter.

Hydraulic pump options to meet varying flow requirements

Hydraulic pump and filters Hydraulic pump and filters

All 8 Family Tractors come standard with an 85-cc displacement integrated hydraulic pump. This pump provides 227.1 L/min (60 gpm) of hydraulic flow.

 

A dual-pump option, featuring 85-cc and 35-cc displacement hydraulic pumps, is available for all 8R and 8RX Tractors. The dual-pump system provides a hydraulic flow of 318 L/min (84 gpm), ideal for running at lower engine speeds.

 

Operating the tractor at reduced engine rpm contributes to a quieter cab, reduced fuel usage, and maintains the vacuum while turning and raising the planter on end rows. At 1500 engine rpm with a 318-L/min (84-gpm) system, there will be an available flow of 229 L/min (61 gpm). This is an improvement over an available 162-L/min (43-gpm) flow when operating with a 227-L/min (60-gpm) system at 1500 engine rpm.

 

SCV flow (approximate)

Engine rpm

Pump flow (85-cc pump) High pump flow (85-cc pump + 35-cc optional pump)

800

86 L/min (23 gpm) 122 L/min (32 gpm)

1500

162 L/min (43 gpm) 229 L/min (61 gpm)

1700

184 L/min (49 gpm) 260 L/min (69 gpm)

1900

206 L/min (54 gpm) 290 L/min (77 gpm)

2100

227 L/min (60 gpm) 318 L/min (84 gpm)

 

The maximum flow through one selective control valve (SCV) with a standard coupler is 132 L/min (35 gpm). A 19.1-mm (3/4-in.) high-flow coupler allows for a maximum flow rate out of one SCV of 153 L/min (40.5 gpm).

 

The hydraulic system is a closed-center, power-on-demand system using a load-sensing pressure-flow compensated axial piston pump with full-flow charge and flow prioritization for steering and brakes.

 

The pump outlet pressure available on demand can range from 3000 kPa (435 psi) for track models and 4000 kPa (580 psi) for wheel models at low standby to 20,400 kPa (2958 psi) at high standby.

  • Gain the advantages of a JDLink™ connected machine
  • Experience the ultimate in comfort with the Ultimate Comfort and Convenience package
  • Get 360 degrees of coverage for maximum productivity with visibility packages
  • Simple turnkey experience with the StarFire™ 6000 Integrated Receiver
  • John Deere Connected Support™ transforms the industry
  • Take advantage of the Generation 4 CommandCenter™ display, designed for efficiency
  • Hydraulic pump options to meet varying flow requirements
×