• 6 twin rows with 36-in (91-cm) or 38-in (96-cm) spacing
  • Available in 2-bu. twin row MaxEmerge™ 5 row unit
  • Optional lift assist wheels may be ordered
Features
Specifications
Details

Features

  • Transport Width: N/A
  • Number of Rows: 36-in (91-cm) or 38-in (96-cm) spacing
  • Central Commodity System (CCS): MaxEmerge 5
  • Models: 6 twin rows 
  • Spacing (inches): 13 ft. 3 in., 16 ft. 4 in., 23 ft. 1 in., 28 ft. 10 in.

Specifications

Closing System

Cast iron closing system

Rubber tire closing system


  • SeedStar™ 2 monitoring system
  • Vacuum system
  • Seed variable-rate drive
  • 1705T downforce options
Features

Features

  • Transport Width: N/A
  • Number of Rows: 36-in (91-cm) or 38-in (96-cm) spacing
  • Central Commodity System (CCS): MaxEmerge 5
  • Models: 6 twin rows 
  • Spacing (inches): 13 ft. 3 in., 16 ft. 4 in., 23 ft. 1 in., 28 ft. 10 in.
Specifications

Specifications

Additional Information - Recommended tractor hydraulics:
Hydraulic oil required to operate the planter: 5.7 L<br/>1.5 gal.<br/>Hydraulic system working pressure: 20,684 kPa<br/>207 bar (3000 psi)<br/>Hydraulic system burst pressure: 82,737 kPa<br/>827 bar (12,000 psi)
Closing System - Cast iron closing system:
<br/><br/>
Closing System - Rubber tire closing system:
<br/><br/><br/>
Dimensions - Transport height:
2.4 m<br/>8 ft
Dimensions - Transport width (with markers):
5.9 m<br/>19.25 in.
Drive System - Base:
Ground driven or hydraulic driven
Fertilizer - Dry fertilizer:
<br/>
Fertilizer - Fertilizer opener type:
<br/>
Frame - Flexibility:
None
Frame - Fold configuration:
Figid
Key Specs - Frame - Flexibility:
None
Key Specs - Frame - Fold configuration:
Rigid
Key Specs - Number of rows:
6 twin rows
Key Specs - Row spacing:
91 or 96 cm<br/>36 or 38 in.
Key Specs - Row unit seed hoppers:
Capacity<br/>58 or 106 L<br/>1.6 or 3 bu<br/>
Key Specs - Seed Meters:
Base<br/>Vacuum<br/><br/>
Lift System - Type:
Integral or Semi-integral
Markers - Control:
<br/>
Markers - Marker disk:
<br/>
Markers - Type:
Automatic alternating or independent control
Row Units - Opener:
Tru-Vee Double Disk
Row Units - Row unit down force:
<br/><br/>
Row Units - Row unit seed hoppers:
Capacity<br/>58 or 106 L<br/>1.6 or 3 bu<br/>
Row Units - Scrapers, opener blades:
<br/><br/>
Row Units - Seed tube sensors:
<br/>Optional<br/>--<br/>
Row Units - Type:
MaxEmerge&trade; 5 row unit
Rows and Row Spacing - Number of rows:
6 twin rows
Rows and Row Spacing - Row spacing:
91 or 96 cm<br/>36 or 38 in.
Seed Meters - Base:
Vacuum
Seed Meters - Central Commodity System:
<br/>
Tires - Base:
7.60-15 6 Ply - Traction: 280 kPa<br/>2.8 bar (40 psi)<br/>7.60-15 8 Ply - Traction: 359 kPa<br/>3.6 bar (52 psi)

Closing System

Cast iron closing system

Rubber tire closing system


Details

SeedStar&trade; 2 monitoring system

Integrated innovation is what operators will appreciate with the SeedStar 2 monitoring system and GreenStar™ 2 Display. An increasing number of acres combined with rising seed costs drive the need to easily understand planter functions and monitor performance. It is all about making every seed count and that is what SeedStar 2 delivers. 

 

The SeedStar 2 monitoring system is a full-feature, color, seed population monitor used in conjunction with the GreenStar family of displays. SeedStar 2 is compatible with the GreenStar 2 1800 and 2600 Displays, GreenStar 3 2630 Display, the Gen 4 4200 CommandCenter™ Display, the Gen 4 4600 CommandCenter Display, the 4240 Universal Display, and the 4640 Universal Display. SeedStar 2 is not compatible with the Gen 4 Extended Monitor. Conveniently, SeedStar 2 planting functions are fully integrated with the full spectrum of Precision Ag Technology applications—guidance, coverage maps, and field documentation can be shown all on one display.

 

When a SeedStar 2 system is used on a planter, there is no need for a ComputerTrak™ monitor. All vital planting information is displayed in one central, easy-to-read location.

SeedStar 2 features
SeedStar 2 full-screen planter run pageSeedStar 2 full-screen planter run page

SeedStar 2 is a user-friendly system that has retained all the valued features of SeedStar and incorporated the next generation of enhancements. For example, on-screen color indicators show drive engagement/disengagement status. In addition, three color planter-at-a-glance bars (black, orange, or red) visually inform the operator of row population status.

 

Not only does SeedStar 2 incorporate the use of color, it also utilizes an intuitive icon and folder based operator interface. Icons are easy to understand across many languages and reduce the need for text. Icons for planter main run page, planter setup, seed/crop setup, totals, and diagnostics are located in the soft-key region of the display. Setup is performed by selecting the appropriate icon and then choosing the tabs to enter/select information.

 

The SeedStar 2 monitor offers all of the features and functionality of the ComputerTrak 350 monitor and much more. SeedStar 2 monitors the following planter functions:

  • Row population/spacing
  • Row failure
  • Average population (entire planter and by variable-rate drive [VRD] motor section)
  • Vacuum level
  • Fertilizer pressure
  • Acre counter
  • Total acreage
  • Tractor speed

In addition, planter operational information is available within the SeedStar 2 monitor system. Such operational information includes population charts, seed disk vacuum settings, and setting recommendations for the piston pump liquid fertilizer system.

 

All SeedStar 2 systems have the capability, through a single controller, to perform both the seed monitoring and variable rate drive functions. SeedStar 2 monitoring is required for VRD population control. Even though the planter may not be equipped with SeedStar 2 VRD, the SeedStar 2 monitoring system is available and will allow for future installation of VRD.

SeedStar 2 enhancements
SeedStar 2 half-screen planter run pageSeedStar 2 half-screen planter run page
SeedStar 2 showing half-width disconnect statusSeedStar 2 showing half-width disconnect status

The SeedStar 2 enhanced planter features include:

  • GreenStar 2 display integration – eliminates the need to operate the GreenStar 2 2600 Display in the original GreenStar monitor mode or the use of dual displays.
  • User-friendly, intuitive icons
  • Half- or full-screen run page
  • On-screen, color drive status – a quick glance at the display tells the operator if the half-width disconnect is engaged or disengaged.
  • Three-color planter-at-a-glance population bar – a black bar indicates that population is close to target and within established limits; orange shows the population is above/below the alarm set point; and red signals the population is out of operating range or is not planting.
  • Three-piece, color VRD indicator – each piece of the VRD gear pie turns green when the wheel motion sensor is active, planter is lowered, and drives are engaged.
SeedStar monitoring original features

SeedStar 2 retains all those SeedStar features that producers value and have come to expect:

  • Planter at a glance – allows operator to view relative population levels of all rows on one screen.
  • Automatic valve calibration – with the SeedStar VRD, this is now completed automatically. There is no longer a need to manually calibrate the hydraulic valves.
  • Increased population updates – SeedStar will now update population levels once a second at planter start up then approximately once every three seconds.
  • Mapping of actual seed rates – When combined with Field Doc™ system, actual and target seeding rates can now be mapped in APEX™ software.
  • Reprogrammable utilizing controller area network (CAN) via Service ADVISOR™ diagnostics system.
  • Improved diagnostics/event recorder – on SeedStar VRD planters, additional diagnostic information is available, as well as an event recorder to capture system performance data at a specific point in time.
  • Ability to run motors at different population levels – on SeedStar VRD, operators running multiple motor systems can run each motor at a different speed, allowing different population levels within a planter.
  • User-configurable high fertilizer pressure alarm – allows the operator to be warned when fertilizer pressure reaches a specific level.
  • Automatic quick-start for SeedStar VRD – the operator no longer needs to press the quick-start button on end row turns to resume planting.
  • Automatic tractor speed source selection – when equipped with an 8000/9000 Series Tractor, the system selects the radar speed or allows for manual speed input selection.

Vacuum system

Vacuum systemVacuum system
Vacuum blower assembly
Vacuum blower shown on 1795Vacuum blower shown on 1795
#

Vacuum is created by a hydraulically driven vacuum blower assembly mounted on the planter frame. The vacuum blower requires a tractor with a closed-center hydraulic system and a separate selective control valve (SCV). For tractors with open-center hydraulic system, a vacuum 540-rpm or 1000-rpm power take-off (PTO) driven hydraulic pump system is available. PTO pumps offered from the factory are limited to 15-row applications or less.

 

Different vacuum levels are required depending on the crop being planted. A hydraulic control valve lets the operator regulate vacuum blower speed, changing the vacuum level. On late-model John Deere tractors, vacuum levels are set from the tractor seat using the SCV controls. The control valve is not needed in those applications. At full flow, the system flows up to 18.9 L/min (5 gpm) per motor.

 

Convenient vacuum gauges located on the planter hitch give a visual indication of the vacuum level. When using a SeedStar™ monitor, the vacuum level can be displayed on the monitor. Consult the vacuum metering seed charts in the operator's manual for initial vacuum setting recommendations.

Vacuum meter case drain
Case drain coupler 7000 Series TractorCase drain coupler 7000 Series Tractor
#

All planters with vacuum metering systems have case drain motors on the vacuum blowers. Case drain lines will have a flush-face case drain coupler on the planter and will require a corresponding flush-face case drain coupler on the tractor. The flush-face coupler simplifies implement attachment by allowing operators to easily identify the case drain. The unique hose tip is unable to connect to another coupler on the tractor, ensuring the correct setup.

 

It is important to connect this case drain hose to prevent the continuous and complete draining of hydraulic fluid due to the relief feature that opens the coupler when the pressure reaches 68.9 kPa (10 psi). This relief feature is designed to protect the motor shaft seal if for any reason the case drain hose was not connected to the tractor. The flush-face hose tips have less back pressure than ISO case drain tips, and the flat surface makes these couplers easy to clean, providing less chance for contamination.

 

The case drain line is also used with all Central Commodity System (CCS™) fan motors.

Seed variable-rate drive

Seed variable-rate drive provides the ultimate planting productivity by utilizing one, two, or three hydraulic motors (varies by model) to turn the seeding drive shaft. Hydraulic control of the seeding drive allows for on-the-go seeding rate changes right from the display mounted inside the tractor cab. Combine this seeding flexibility with the map-based planting option, and seeding rates adjust automatically based on the prescribed map. 

 

Variable-rate drive offers the following advantages over common, ground, or contact-tire drive systems: 

  • Rate changes are almost instantaneous; no ramp up or ramp down of system as in some competitive systems
  • Permits the producer to match seed population based on different soil types or irrigation practices
  • John Deere design provides added operator safety by eliminating any possible drive creep found in some competitive variable-rate drive systems
1755 equipped with variable-rate drive1755 equipped with variable-rate drive
1765NT equipped with variable-rate drive1765NT equipped with variable-rate drive

Single- or dual-motor systems for variable-rate drives are available for all John Deere planters except the 1785 Rigid Frame. Variable-rate drive is available as a factory-installed option for all applicable planter models.

Single- or dual-motor systems are available as field-installed attachments for most planter models; however, a three-motor variable-rate drive field-installed attachment is not available.

Seed variable-rate drive requires the SeedStar™ monitor and a radar input signal. Either tractor or planter radar may be used. Planter radar is ordered separately.

 

NOTE: Peanut seed meter disks require the variable-drive transmission.

1705T downforce options

Pneumatic downforce springs
Pneumatic downforce systemPneumatic downforce system
#

Pneumatic downforce provides convenient, simple adjustment of downforce for the whole planter from one location. The amount of downforce applied is infinitely adjustable from 0 kg to 181.4 kg (0 lb to 400 lb). Pneumatic downforce provides more consistent downforce throughout the range of row-unit travel than mechanical-spring downforce systems. Each row-unit has a single rubber air bag located between the parallel arms. The air bags are hooked in parallel so that air can be added or released from all rows at once from one location.

 

Pneumatic downforce systems are available as base equipment on all 1705 Series and DB Planters.

Pneumatic downforce with spring upforce kit
Pneumatic downforce with spring upforce kitPneumatic downforce with spring upforce kit
Spring upforce kitSpring upforce kit

Pneumatic downforce with spring upforce kit option includes the same convenient, simple adjustment of downforce with up to 81.6 kg (180 lb) of upforce per row-unit. Dual upforce springs provide the row-unit upforce to increase flotation in softer soils. This upforce can also be used to counteract excess row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be placed on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

  • SeedStar™ 2 monitoring system
  • Vacuum system
  • Seed variable-rate drive
  • 1705T downforce options

Other Planting Equipment Models

×