• Knife stalk rolls result in better stalk control
  • AutoTrac™ RowSense™
  • Single-point latching system is fast and easy
  • Gathering chains designed for increased life
Features
Specifications
Details

Features

  • width/row: 8 rows
  • row spacing: 30 in, 36 in, 38 in

Specifications

Corn Head

Center and outer gatherers Hinged, quickly removable
Chopping options Rotary
Deck plate adjustment Hydraulic adjustment
Gatherer chain adjustment Spring loaded, self-adjusting
Gatherer chains Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link)
Gatherer points Four-position, low-profile floating type hinged above gatherer chains
Minimum clearance between gatherer chains and ground 32 mm
1.25 in.
Row unit drive Enclosed, submerged-in-lubricant gearbox, driven by single input hexagon shaft
Slip clutch One per row-unit plus auger drive
Stalk rolls Fluted, opposed, intermeshing, and chopping (two per row-unit)
Trash knives Full-length, one-piece, heat-treated steel
  • StalkMaster™ row-unit enables a high level of stalk residue processing
  • AutoTrac™ RowSense™ enables hands-free corn harvest
  • RowMax™ row-unit kit for 700C/FC and 600C/FC Corn Heads
  • RowMax™ stalk roll options for a variety of customer needs
Features

Features

  • width/row: 8 rows
  • row spacing: 30 in, 36 in, 38 in
Specifications

Specifications

Additional information - Date collected:
19-Feb-2019
Corn Head - Center and outer gatherers:
Hinged, quickly removable
Corn Head - Chopping options:
Rotary
Corn Head - Deck plate adjustment:
Hydraulic adjustment
Corn Head - Gatherer chain adjustment:
Spring loaded, self-adjusting
Corn Head - Gatherer chains:
Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link)
Corn Head - Gatherer points:
Four-position, low-profile floating type hinged above gatherer chains
Corn Head - Minimum clearance between gatherer chains and ground:
32 mm<br/>1.25 in.
Corn Head - Row unit drive:
Enclosed, submerged-in-lubricant gearbox, driven by single input hexagon shaft
Corn Head - Slip clutch:
One per row-unit plus auger drive
Corn Head - Stalk rolls:
Fluted, opposed, intermeshing, and chopping (two per row-unit)
Corn Head - Trash knives:
Full-length, one-piece, heat-treated steel
Dimensions - Approximate overall width:
Points in operating position (lowered)<br/>3 m<br/>10 ft<br/>Points folded up (service position)<br/>2.7 m<br/>9 ft<br/>6.1 m<br/>20.01 ft
Dimensions - Approximate shipping weight (includes shipping skid):
2,635 kg<br/>5,810 lb
Dimensions - Row spacings:
69.9, 74.9, 76.2, 91.4, or 96.5 cm<br/>27.5, 29.5, 30, 36, or 38 in.
Key Specs - Approximate overall width:
6.1 m<br/>20.01 ft
Key Specs - Deck plate adjustment:
Hydraulic adjustment
Key Specs - Gatherer chain adjustment:
Spring loaded, self-adjusting
Key Specs - Gatherer chains:
Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link)
Key Specs - Row spacings:
39.9, 74.9, 76.2, 91.4, or 96.5 cm<br/>27.5, 29.5, 30, 36, or 38 in.

Corn Head

Center and outer gatherers Hinged, quickly removable
Chopping options Rotary
Deck plate adjustment Hydraulic adjustment
Gatherer chain adjustment Spring loaded, self-adjusting
Gatherer chains Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link)
Gatherer points Four-position, low-profile floating type hinged above gatherer chains
Minimum clearance between gatherer chains and ground 32 mm
1.25 in.
Row unit drive Enclosed, submerged-in-lubricant gearbox, driven by single input hexagon shaft
Slip clutch One per row-unit plus auger drive
Stalk rolls Fluted, opposed, intermeshing, and chopping (two per row-unit)
Trash knives Full-length, one-piece, heat-treated steel
Details

StalkMaster™ row-unit enables a high level of stalk residue processing

StalkMaster row-unitStalkMaster row-unit

Available as an option, StalkMaster provides ultimate stalk sizing by processing stalks smaller than stalk rolls allowing the operator to potentially eliminate second-pass operations, saving time, fuel, labor, and additional operating costs.


Feature benefit:

  • Consistent sizing of corn stalks to speed up decomposition and provide soil protection from blowing wind and water runoff
  • StalkMaster can be equipped with either intermeshing, opposed, or chopping stalk rolls
  • Ultimate flexibility to chop or not chop when desired through a quick, no-tools-required disconnect feature
Functionality
StalkMaster bladesStalkMaster blades

Each StalkMaster row-unit gearcase is equipped with two heat-treated and wear-coated rotating blades positioned below the stalk rolls. The blades can be reversed to extend their wear life. These blades cut stalk to size and distribute residue evenly throughout the row. If the blades encounter an obstruction they will swing backward, avoiding damage and interruption to harvest.

StalkMaster disconnect featureStalkMaster disconnect feature

The StalkMaster row-unit gearcase feature a no-tools-required disconnect. Each row has a lever on the right side of the gearcase to turn the function on or off in a matter of minutes if desired, allowing for lower fuel consumption.

StalkMaster gearcaseStalkMaster gearcase

A heavy-duty slip-clutch design protects the row-unit gearcase and the StalkMaster lower unit gearcase.

712C right-hand side and drive shaft712C right-hand side and drive shaft

The gathering chains and stalk rolls for each row are enclosed to provide robust durability. Heavy-duty bearings along with O-ring seals improve serviceability.

Larger sprockets and chainLarger sprockets and chain

A continuous-loop chain allows higher loads and longer life by eliminating all connector links and half links. The large-diameter sprockets along with a large 38-mm (1.50-in.) transverse hex back shaft and row-unit shaft provide improved sprocket and chain.

Telescoping drive shaftTelescoping drive shaft

A telescoping drive shaft mounts to the splined feederhouse back shaft on all 50, 60, 70, W-, T-, C-, and S-Series Combines.

The coupler features an 8-degree index, allowing the customer to match the drive shaft splines without rotating the platform feederhouse.

Telescoping drive shafts can be retrofitted to earlier 90 Series and 40 Series Corn Heads.

Rubberized curtainsRubberized curtains
Steel-protective shieldSteel-protective shield

StalkMaster row units feature side- and rear-mounted rubberized curtains to optimize residue distribution. The right-hand side of the head has an additional shield to protect customers from protruding blades.

AutoTrac&trade; RowSense&trade; enables hands-free corn harvest

Feelers keep the combine on the rowFeelers keep the combine on the row

AutoTrac RowSense, an innovative global positioning system (GPS) steering system, reduces overlap and fatigue during harvest.

Feature benefit:

  • Continue harvesting in down crop and dusty conditions
  • Increases acre-per-hour potential and reduce grain loss
  • Enhances operator comfort while reducing stress
Functionality
StarFire™ position receiver picks up signalStarFire™ position receiver picks up signal

RowMax&trade; row-unit kit for 700C/FC and 600C/FC Corn Heads

The 700C/FC Corn Head RowMax row-unit provides customers increased durability and longer wear life. RowMax row-units include updates to gathering chains, gathering chain sprockets, chain guides, and stalk rolls. These improvements extend the life of the corn head for lower ownership cost.

Feature benefit:

  • Increased wear life of row-unit gathering chains and sprockets by 50 percent due to solid alloy pin bushings and increased number of sprocket teeth
  • Increased wear life of stalk rolls up to 30 percent with an improved wear coating
  • Maintain corn head performance durability with an increase in stalk roll material hardness
RowMax row-unitRowMax row-unit
Gathering chain and sprocketGathering chain and sprocket

Functionality:

To extend the life of the corn head, the RowMax row-unit increases the number of sprocket teeth on gathering chains from six teeth to eight teeth. The gathering chain has an additional 12 links and an anti-bend back feature on the chain lug. Gathering chain wear is reduced by using a solid alloy bushing.

RowMax&trade; stalk roll options for a variety of customer needs

Customers have asked for stalk rolls to appropriately size residue for their operation while managing power and overall header weight.

John Deere offers RowMax stalk rolls to address customer needs around residue, power, and weight for their front-end equipment.

RowMax stalk roll features and benefits:

  • RowMax stalk rolls can improve wear life by 25 to 30 percent compared to the 600C base stalk rolls.
  • Three stalk roll options allow customers to select the appropriate length of corn stalk residue.
  • To provide high performance during harvest, RowMax stalk rolls are designed with reduced power and fuel consumption in mind.
  • RowMax Chopping Stalk Roll drops stalk residue on top of the row for improved planting performance for no-till and strip-till customers the following season. Additionally, the chopping stalk roll blossoms the top of the stalk for reduced tire and track damage.
Stalk residue dropped on top of the rowStalk residue dropped on top of the row
Top of the stalk is blossomedTop of the stalk is blossomed

RowMax stalk roll details:

  • The stalk rolls are manufactured from highly durable austempered ductile iron material with an added wear coating for increased wear life.
  • The full-length blades provide total crop contact for appropriate sizing and cutting action from front to back.
  • Stalk roll tip speed compared to gathering chain speed is optimized to reduce material-other-than-grain (MOG) intake and increase overall capacity while minimizing losses.
  • Enclosed chain drives gathering chains and stalk rolls for each row to provide robust durability and uninterrupted harvesting.
  • Single-piece cast knife roll design provides excellent serviceability when replacement is required.
Row-unitRow-unit
Single-piece cast knife rollSingle-piece cast knife roll
Choosing the correct RowMax stalk roll
Stalk rolls without
StalkMaster™ corn heads
RowMax OpposedRowMax IntermeshingRowMax Chopping
Knife alignment
Residue sizeGoodGoodBetter
Residue breakdownFastFasterFastest
Soil warm up/dry downFastFasterFastest
Wear lifeBetterBetterBest
Row unit power consumptionBestBetterBetter
Fuel consumptionBestBetterGood
Trash intakeBestBetterBetter
Dry stalksBestGoodGood
Wet stalksBestBetterBetter
Down cornBestGoodGood
Weight for two stalk rolls17.2 kg (38 lb)18.1 kg (40 lb)19.5 kg (43 lb)
StalkMaster with RowMax opposed stalk roll
Residue sizeBest
Row unit power consumption vs. opposed without StalkMasterGood
WeightAdditional 19.1 kg (42 lb) per row for StalkMaster components
General stalk roll parts information
Number of knives8610
Aftermarket part numbers* (left hand)HXE110671HXE110675HXE141569
Aftermarket part numbers* (right hand)HXE110672HXE110676HXE141570
Compatibility

Model year 2012 and newer 600C/600FC and 700C/700FC for StalkMaster and non StalkMaster row units; factory-installed option code for model year 2020 Corn Heads

*NOTE: Part numbers are subject to change. Please check the parts order before completing the transaction.

  • StalkMaster™ row-unit enables a high level of stalk residue processing
  • AutoTrac™ RowSense™ enables hands-free corn harvest
  • RowMax™ row-unit kit for 700C/FC and 600C/FC Corn Heads
  • RowMax™ stalk roll options for a variety of customer needs
×