• Windrowing capability with 600D Drapers
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground
  • Stainless-steel feed floor
Specifications
Details

Specifications

Auxiliary top auger

Type Optional hydraulic drive
  • Double-cut knife system produces a cleaner cut
  • Takes only one person a few minutes to convert draper from field to transport without use of tools
  • Dual-knife drive system is timed
  • Reel resume and reverse are features on the 600D Drapers
Features

Features

Specifications

Specifications

Auxiliary top auger - Type:
Optional hydraulic drive
Cutterbar - Cutterbar tilt:
Base hydraulic, 9 degrees tilt maximum
Cutterbar - Knife drive:
Dual knife base, single optional (for combine use only)
Cutterbar - Knife speed:
490 cycles/min
Cutterbar - Length:
9.3 m<br/>30.5 ft
Cutterbar - Type:
Straight line knife drive system
Dimensions - Overall operating depth:
2.5 m<br/>8.2 ft
Dimensions - Platform length:
10.0 m<br/>32.9 ft
Dimensions - Transport length, hitch extended:
12.3 m<br/>40.4 ft
Dimensions - Transport width on wheel, less dividers:
2.7 m<br/>8.9 ft
Dimensions - Transport width, field position:
9.9 m<br/>32.5 ft
Draper belts - Center belt reverse:
Base; Center belt not included with SPW configuration
Draper belts - Clean height:
25.4 mm<br/>1 in.
Draper belts - Operating speed:
Side belts: variable up to 223 m/min<br/>735 fpm<br/>Center belts: 212 m/min<br/>695 fpm<br/>Center belt not included with SPW configuration
Draper belts - Speed control:
Hydraulic from cab
Draper belts - Width:
Side belts 1,016 mm<br/>40 in.<br/>Center belts 1,397 mm<br/>55 in.<br/>Center belt not included with SPW configuration
Feed drum - Auger finger platform:
Dual chevron, retracting
Feed drum - Center clean out door:
Base
Feed drum - Diameter:
406 mm<br/>16 in.<br/>Feed drum not included with SPW configuration
Feed drum - Drum/auger reverse:
Base
Feed drum - Feed drum fingers:
Heavy duty round 16 mm (0.625 in) diameter with breakaway notch and retainer
Feed drum - Finger reach:
195 mm<br/>6 in.
Feed drum - Number of fingers:
18
Feed drum - Operating speed:
195 rpm
Header height sensing - Header height sensing off the ground:
Base
Header height sensing - Header height sensing on the ground:
Base
Header height sensing - Type:
Electro-hydraulic base
Pickup reel - Diameter:
1,067 mm<br/>42 in.
Pickup reel - Fingers:
Nylon base, steel optional
Pickup reel - Height control:
Hydraulic
Pickup reel - Number of slats:
6 bat poly base, 6 bat steel optional
Pickup reel - Operating speeds:
6-54 rpm
Pickup reel - Reel fore and aft:
Cylinder stroke 359 mm<br/>14.1 in.<br/>Total range 620 mm<br/>24.4 in.
Pickup reel - Reel lift:
Cylinder stroke 330 mm<br/>13 in.<br/>Total Range 391.5 mm<br/>15.4 in.
Pickup reel - Reel resume:
Base
Pickup reel - Reel reverse:
Base
Pickup reel - Speed control:
Hydraulic
Weight - Approximate weight (pickup reel):
Combine only 3,109 kg<br/>6,855 lb<br/>SPW only 2,509 kg<br/>5,532 lb
Weight - Approximate weight (with transport):
Combine only 3,286 kg<br/>7,245 lb<br/>SPW only 2,686 kg<br/>5,922 lb

Auxiliary top auger

Type Optional hydraulic drive
Details

Double-cut knife system produces a cleaner cut

All John Deere 600D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft) and 12.1-m (40-ft) draper cutterbars also have knifeback reinforcement straps to strengthen the knifeback.

 

Customer Value:

  • Longer stroke of knife section provides a faster, cleaner, and smoother cut which allows operators to harvest at faster ground speeds maximizing productivity
  • Reinforced knifeback strengthens cutterbar for tough harvesting conditions maximizing performance
  • Hardened sickle sections and unique boron treatment extends wear life
  • Hydraulic tilt optimizes the cutterbar angle for varying conditions, extending the harvest day and providing the lowest-possible cut height
Double-cut cutterbar systemDouble-cut cutterbar system
Double-cut rock guardDouble-cut rock guard
Theory of Operation:

The 100-mm (4-in.) cutting action produces a cleaner cut versus the tearing effect of shorter-stroke cutting systems. Knife hold-downs are easily adjusted to help maintain harvesting performance.

Tilt cylinderTilt cylinder
#

 

The cutterbar hydraulic tilt adjusts a full 8 degrees while maintaining excellent visibility to the cutterbar throughout the tilt range. For improved ease of use the optional advanced hydro handle can be configured to control the platform tilt.

Takes only one person a few minutes to convert draper from field to transport without use of tools

The 630D, 635D, and the 640D Draper models can be equipped with an integral, slow-speed transport system.

 

Customer Value:

  • Dual-front dolly wheel tires with an extendable tongue and two-gauge wheel tires carry the complete weight of the draper when in transport, eliminating the need for a header trailer
  • One person can convert the draper from field to transport mode in a few minutes without the use of tools, expediting road transport
600D integral transport system600D integral transport system
600D integral transport system pulled by tractor600D integral transport system pulled by tractor
Theory of Operation:
Step 1-lock left-hand gauge wheels in placeStep 1-lock left-hand gauge wheels in place
Step 2-lock right-hand gauge and transport wheelsStep 2-lock right-hand gauge and transport wheels
Step 3-position transport warning lightsStep 3-position transport warning lights
Step 4-install transport tongueStep 4-install transport tongue

 

In field mode, the dual wheels become the left- and right-hand gauge wheels. For transport, the left-hand dual-dolly wheels support one side of the draper frame and the right-hand dual wheels are repositioned to support the right-hand end of the frame.

 

The transport package includes warning lights, which can be plugged into a seven-way power source for road transport with a 32.2-km/h (20-mph) speed limit for farm equipment transport.

 

NOTE: The 630D, 635D, and the 640D Drapers are equipped with two 20.5 x 8.0 12-ply equivalent gauge wheel tires as base equipment and four 20.5 x 8.0 12-ply equivalent gauge wheels with the low-speed transport option.

Dual-knife drive system is timed

Cutterbar epicyclical gearcaseCutterbar epicyclical gearcase
Knife drive shaftKnife drive shaft

The unique dual-knife-drive system is timed, creating the smoothest-possible reciprocating knife-drive system currently in the industry. The positive, reliable shaft-driven dual epicyclical in-line knife drives with built-in driveline protection provide operators with the strongest knife-drive system.

Reel resume and reverse are features on the 600D Drapers

Reel resume and reverse are features on the 600D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, leaning crops. 

 

Customer Value:

  • Added time savings and convenience with saved reel positions, lowering operator fatigue
  • Reel-reverse feature reverses the reel in conjunction with the center feed drum and belt to back out plugs and increase harvest efficiency
Draper drumDraper drum
Draper reelDraper reel
  • Double-cut knife system produces a cleaner cut
  • Takes only one person a few minutes to convert draper from field to transport without use of tools
  • Dual-knife drive system is timed
  • Reel resume and reverse are features on the 600D Drapers

Related Inventory For Sale

×